The Boso-Medilife Pc 2 Memory - boso medilife PC2 Mode D'emploi

The boso-medilife PC 2 memory

The boso-medilife PC 2 stores up to 250
measurements. If the memory is full, (symbol
on the time display mode), the oldest
M
measurement is cleared from memory and the
most recent value stored.
You can recall stored readings by switching on
the unit and pressing and holding down the
START butt-on until the last measurement that
has been stored appears in the display
M
(symbol ).
M
Now all the stored measurement readings are
shown successively for three seconds. (If no
measurements are stored in memory, the
systolic, diastolic and pulse readings all show
the value '0' for three seconds.)
By pressing the START button again, the
memory display is interrupted and a new
measurement started.
Erasing the memory
Press the SET button for approximately five
seconds until the M
The memory is now erased.
symbol starts to flash.
31