Displaying Individual Stored Values - boso Medicus X Mode D'emploi

Displaying individual stored values

After indication of the average values automatically
all measured values are displayed in chronological
order (starting with the most recent value). Before
the values are shown, the number of the measure-
ment is displayed (see illustration 10).
The corresponding measurement value appears after
3 seconds (see illustration 11).
M
Illustration 10
60
M
Illustration 11
After the last value has been
shown the device switches off
automatically.
Erase the memory
Press and hold the START but-
ton for about 5 seconds with
the monitor switched off. The
display shows "
Systole
Release the START button.
mmHg
Then press the START button
again. The display shows
Diastole
"
mmHg
automatically shuts off.
Pulses/min.
".
". Wait until the unit