Recall Of Stored Readings - boso medilife PC3 Mode D'emploi

Recall of stored readings

➡ You can recall stored readings by
switching on the unit and pressing
and holding down the START butt-
on until the last measurement that
has been stored appears in the dis-
play (symbol M).
Now all the stored measurement rea-
dings are shown successively for five se-
conds. (If no measurements are stored in
memory, the systolic, diastolic and pulse
readings all show the value '0' for three
seconds.)
➡ The unit can be switched off by sim-
ply pressing the START-button.
If all measurements of the memory have
been displayed the unit switches off au-
tomatically after 5 seconds.
Erasing the memory
➡ Press the SET button for approxima-
tely five seconds until the M sym-
bol starts to flash.
The memory is now erased.
65
DE
GB
FR
IT
ES