The Boso-Medilife Pc3 Memory - boso medilife PC3 Mode D'emploi

The boso-medilife PC 3 memory
The boso-medilife PC 3 stores up to 280
measurements. If the memory is full, (symbol
M
on the time display mode), the oldest
measurement is cleared from memory and the
most recent value stored.
You can recall stored readings by switching on
the unit and pressing and holding down the
START butt-on until the last measurement that
has been stored appears in the display
M
M
(symbol ).
Now all the stored measurement readings are
shown successively for five seconds. (If no
measurements are stored in memory, the
systolic, diastolic and pulse readings all show
the value '0' for three seconds.)
By pressing the START button again, the
memory display is interrupted and a new
measurement started.
The unit can be switched off by simply pressing
the START-button.
If all measurements of the memory have been
displayed the unit switches off automatically af-
ter 5 seconds.
Erasing the memory
Press the SET button for approximately five
M
seconds until the
The memory is now erased.
symbol starts to flash.
31