boso Medicus Exclusive Mode D'emploi page 69

Measurement display
appears again even with the arm held still,
this may be an indication of an irregular
heartbeat. Please discuss this with your
doctor at your next visit.
The symbol indicates that the arm mo-
ved during measurement. You are advised
to take another measurement.
Blood pressure is a dynamic parameter and
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
¬ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the START button again
briefly.
The device switches off automatically after
60 seconds (or 60 minutes, see settings).
Press the START button again to repeat a
measurement.
Allow at least two minutes be-
2
min tween measurements.
Excessively frequent measurements can
cause injury as a result of impaired blood
flow.
¬ If no further measurement is required,
remove the cuff from the arm.
EN
69