Displaying Individual Stored Values - boso medicus family Mode D'emploi

Displaying individual stored values

The last measurement stored will be displayed imme-
diately after the average value has been retrieved.The
number of the measurement appears in the display
(see illustration 10).
The corresponding measurement value appears after
3 seconds (see illustration 11).
M
M
N 01
Illustration 10
M
Illustration 11
All stored measurements are
displayed automatically in the
same way, one after the other.
➡ The monitor can be swit-
ched off by pressing the
start/stop button again.
The monitor switches off auto-
matically 5 seconds after the
Systole
last measurement is displayed.
mmHg
Diastole
when the monitor is swit-
mmHg
ched on can result in loss of
data (see page 46. Change
Pulses/min.
batteries only when the moni-
tor is switched off).
Changing batteries
59