Displaying individual stored values and
clearing the memory store
➡ To recall the last recorded message press „M".
The date and time of this measurement will be
displayed and after about 3 seconds the actual
measurement value comes up automatically
(Systole, Diastole, Puls) (see illustration 10).
Illustration 10
Systole
mmHg
Diastole
mmHg
Pulses/min.
➡ Repeated pressing of „M"
will now successively dis-
play all measurements con-
tained in the memory as
described above.
➡ To start a new measure-
ment,
simply
„START".
If no button is pressed, the unit
switches off automatically after
5 seconds.
Clearing the memory store
Press „M" and hold for 5
seconds until the symbol
starts to flash. The memory
store is now cleared.
press
65