hajdu HP-TOWER HPT200C Manuel De Mise En Service, D'opération Et D'entretien page 93

Error
Display Description
code
0
1
2
3
4
5
6
7
8
3) In case of frequent errors, the appliance switches to Standby mode. It still re-
mains operational, however, with much lower effi ciency than earlier. Please, con-
tact a professional.
3.a) In case of serious error, the system cannot operate any more. Please, contact
a professional.
3.b) In case of an error, the buzzer of the appliance buzzes every two minutes, the
ALARM indicator becomes bright, and the display shows the error code and
the water temperature after each other. To switch off the alarm, press and
hold down the CANCEL button for 3 seconds.
4) Restart after long period of rest
When the appliance is restarted (including the trial mode) after a longer period of
rest, it is normal that the water received may not be clean. In this case, leave the
faucet open and the outfl owing water will become clean soon.
Memory error
Pressostat shutdown
Safety thermostat shutdown
NTC 1 sensor: irregular temperature at the NTC1 sensor
NTC 2 sensor: irregular temperature at the NTC2 sensor
NTC 3 sensor: irregular temperature at the NTC3 sensor
NTC 4 sensor: irregular temperature at the NTC4 sensor
NA
Communication error between the control system and the
display.
93