hajdu HP-TOWER HPT200C Manuel De Mise En Service, D'opération Et D'entretien page 56

HPT 200 • HPT 200C
The appliance produces hot water for domestic or similar use at temperatures under
the boiling point. For this purpose, the appliance must be hydraulically connected to
the domestic water pipeline. Electric current is also required for the operation of the
appliance. The usage of ventilation ducts is optional and it will be described later in
more details.
It is forbidden to use the appliance for other than its designated purpose. Any other
use of the appliance is considered to be improper and therefore forbidden. In particu-
lar, the appliance may not be used in industrial cycles and / or environments exposed
to corrosion or explosive materials.
The manufacturer and distributor shall assume no liability for damages arising from
unprofessional installation, improper or wrong use, reasonably unforeseeable use, or
incomplete or careless compliance with the instructions included in the manual.
Persons with reduced physical, perceptive or mental abilities (including children) or
persons without complete knowledge and experience concerning the appliance are
not permitted to use the appliance, unless supervised by a person responsible for
their safety or given adequate information on the operation of the appliance. The su-
pervision of children is required to prevent them from playing with the appliance.
The manufacturer is responsible for ensuring that the appliance complies with all con-
struction guidelines, laws and requirements eff ective at the time of the fi rst commer-
cial launch of the product. Under their respective control, the constructor, user and in-
stallation technician are exclusively responsible for the knowledge of and compliance
with legal requirements concerning the construction, installation, operation and main-
tenance of the appliance. References in this manual to laws, requirements or technical
specifi cations are for information only. Newly adopted laws or amendments of eff ec-
tive laws shall impose no obligation on the manufacturer to third persons in any way.
In order to underline the importance of warnings of dangers associated with the in-
stallation and operation of the appliance, the following symbols are used.
Failure to observe the warning may result in serious injury or, in certain cases,
death even.
Failure to observe the warning may result in damages, or cause harms to
the building, the plants or animals.
Compulsory compliance with the general and specifi c safety instructions
related to the product.
Parts or points written after the expression "WARNING!" and/or written in bold type
contain important information or recommendations and it is indispensable to observe
these and comply with them.
56
1.2. Areas of use
1.3. Instructions and technical standards
1.4. Explanation of symbols used