Télécharger Imprimer la page

hajdu HP-TOWER HPT200C Manuel De Mise En Service, D'opération Et D'entretien page 83

Chauffe-eau thermodynamique

Publicité

Les langues disponibles

Les langues disponibles

For the explanation of the symbols used in the table below, see Clause 1.4 of the chap-
ter GENERAL INFORMATION.
Warning
Protect connection pipes and wires against
1
possible damages.
Make sure that the location of installation and any
2.
system to which the appliance is connected must
fully comply with all eff ective regulations.
Use manual tools and equipment suited to the
purpose (and in particular, make sure that the tools
are not worn out, their handles are intact and fi xed
safely).
3.
Use tools and equipment in a proper way, so that
they cannot fall down from elevated locations. Put
the tools and equipment back into their places
after use.
Use electric equipment suited to the given
purpose. Use the equipment properly. Do not
leave supply cables in the passages. Prevent the
4.
equipment from falling down from elevated
locations. Disconnect them from the mains supply
system and put them back into their places after
use.
Parts should be cleaned from crust according
to instructions on the safety data sheet of the
applied product while ensuring the ventilation
5.
of the location and wearing protective clothing.
Avoid mixing diff erent products, and protect the
appliance and the surrounding objects.
Make sure that portable ladders are placed safely,
and that they are adequately resistant, their steps
are intact and slippery free. The ladder should not
6.
be moved while there is somebody on it. One
person should always supervise any work carried
out.
Make sure that adequate hygienic conditions are
provided, in terms of lighting, ventilation and the
7.
stability of related structures in the place where
works are carried out.
7.4. Safety precautions
Danger
Electric shock caused by touching live
parts.
Flooding caused by water leaking from
broken pipes.
Electric shock caused by touching
live parts that are put into operation
improperly.
Damage to the appliance caused by
improper operating conditions.
Personal injury caused by fl ying chips or
shatters, dust inhalation, injuries or bruises
caused by hitting, cutting or stabbing.
Damage to the appliance or surrounding
objects caused by falling chips, hitting or
cutting.
Personal injury caused by fl ying chips or
shatters, dust inhalation, injuries or bruises
caused by hitting, cutting or stabbing.
Damage to the appliance or surrounding
objects caused by falling chips, hitting or
cutting.
Personal injuries caused by acidic agents
contacting the skin or eyes; inhalation or
swallowing of harmful chemicals.
Damage to the appliance or surrounding
objects caused by the corrosive eff ect of
acidic agents.
Personal injury caused by falling or
accidental folding of the ladder.
Personal injuries caused by hitting, falling
etc.
83

Publicité

loading

Ce manuel est également adapté pour:

Hp-tower hpt200