aldes InspirAIR TOP Guide D'installation page 21

EN FR 5. START-UP / SETTINGS
INSTALLER
INSTALLER
Password
INSTALLER INSTALLER
Password
First start-up: When starting up the unit for the first time, use of the wizard is mandatory. The unit will not start up unless each step has been validated by the
installer, at least until the flow wizard has been completed.
Language
Installation Country
Orientation
Config A
INSTALLER
Electric Coil
Condensate connection
Regulation Mode
Flow Assistant
Connectivity Assistant
21
Element
Customizes remote control language for the user and installer.
Allows the unit to adapt the menu to the country in question. Some functions (flow assistant, fire-dam-
pers, etc.) are specific to certain countries only.
Allows you to set the unit's orientation. If the unit remains in A, no action is required.
Config B Allows you to set the unit's orientation. If unit remains in A, no action required.
Lettre B ok If configuration to B is needed, tick letter B.
Reverse filter If in B, reverse filters.
NO (accessory not available in North America).
Confirms that the condensate connection has been made.
Selects the unit's control mode (see details on next page).
Allows you to set the value of each ventilation level (L0- Vacation / L1- Daily / L2-Pushbutton / L3-
Boost).
Allows you to set the presence of specific accessories. Optional menu.
Installer
Installateur
Start-up
Mise en service
Settings
Réglages
Pays d'installation
Country of Installation
Config niveaux
Configuration Levels
Type logement
Ajustement rapide
Quick Adjustment
Connectivity Connectivité
Maintenance
Maintenance
Valeurs réelles
Function
Langues
Languages
Housing Type
Déséquilibre
Imbalance
Mode radon
Radon Mode
Foyer ouvert
Open Fireplace
Timer filtres
Timer Filters
Unités
Units
Certifications
Certifications
Reset Usine
Factory Reset
Capteurs
Sensors
Fire dampers
Fire Dampers
Contact sec
Dry Contact
Real Values
Démo signal
Demo Signal