aldes InspirAIR TOP Guide D'installation page 16

2. SAFETY INSTRUCTIONS
2.1. General Instructions
Please read carefully before installation and start-up. Keep these instructions for the life of the unit.
Precautions and restrictions of use :
- This appliance is intended exclusively for domestic use, to ensure air renewal in a home as part of a controlled mechanical ventilation system.
- Do not connect this unit to the exhaust of a chimney or appliances such as motorized hoods, air conditioning, heating, tumble dryers, gas boilers or
any other appliance discharging air or dust.
- Do not suck in hot air over 40°C, explosive vapours or air containing dust particles.
- Do not use the device in the presence of flammable substances or vapours such as alcohol, insecticides or gasoline.
- The manufacturer cannot be held responsible and declines all liability in the event of damage to persons or property due to inappropriate use.
Personal safety :
- To avoid any risk of injury or damage to the unit, it is not recommended to repair the electrical or mechanical components yourself. The HRV or ERV
must be installed and serviced by a CERTIFIED heating and air-conditioning contractor.
- Children should be supervised to ensure that they do not play with the device.
Installation and maintenance precautions :
- The unit must be installed in a room where the ambient temperature does not exceed 60°C.
- The electrical connection must be made by a professional in accordance with the local electrical code.
- In particular, a contact separation device with an opening distance of at least 3 mm on each pole and a protection device with a suitable rated
current must be provided in the fixed wiring (circuit breaker). Copper conductor cross-sections must be at least 1.5 mm².
- Prior to start-up, all conduits and the discharge must be connected.
- Conduits must be secured with screwed clamps, or with the clamps supplied with the product.
- Precautions must be taken to prevent the back flow of gas from the exhaust pipe of gas appliances or other open-fire appliances into the room.
- Switch off the power supply before any maintenance or cleaning operation, and ensure that the unit cannot be switched on accidentally.
- For units fitted with a power cable, do not use extension cords, adapters or multiple sockets.
- If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or similarly qualified persons to avoid danger.
- If the problem persists, contact your installer or retailer.
- Use only original manufacturer's spare parts.
End of product life :
If you have any problems, please contact your installer or dealer. This product must not be disposed of with household waste. At the end of
its life, or when it is replaced, it must be handed over to a dealer or collection center. ALDES is a member of the Eco Systemes eco-
organization www.ecosystem.eco/
Product certifications :
Certificates of conformity with current standards are available from the manufacturer.
For installation or maintenance problems, please contact your installer or retailer.
2.2. Mechanical hazards
Always connect the air ducts to the control unit before connecting the power supply. This ensures that it is impossible to touch the motors while the
unit is running.
2.3. Electrical hazards
The unit must not be switched on and left in the user's use until the front panel has been secured in place.
EN FR
16