7-3. Servicing Motor Brushes
Top View − Cover Removed
Tools Needed:
OM-244785 Page 18
1
2
3
1
Motor Brushes
2
Sight Windows
3
Motor Brush Release Tabs
Carbon brushes in the motor will
wear. The expected life is approxi-
mately 600 working hour. We recom-
mend replacing the carbon brushes
regularly to ensure proper operation
of the unit, or when the end of either
brush is visible in the sight window.
Replace carbon brushes as follows:
Disconnect input power
Remove top cover
Remove black wires from brush
holders
Depress release tabs, and slide
brush/holder out
Insert new brush/holder, and slide
in until it locks in place
Reinstall top cover.
2
252 806