CAMPAGNOLO 13s CHAIN HD-LINK Mode D'emploi page 29

4 - TO O L S
WARNING !
• All connecting and disconnecting of the Campagnolo 13 speed chains should be
®
performed using the special Campagnolo UT-CN400 tool, not included in this kit. Use of
®
other tools could damage the chain and/or provoke unexpected chain failure resulting
in an accident, personal injury or death.
• The pusher of the Campagnolo tool UT-CN400 is fitted with a pin with a replaceable
®
tapered tip which is of fundamental importance for correct assembly of the bushing
ULTRA-LINK; if the pin is worn or damaged, replace it with the special Campagnolo UT-
®
CN301 spare pin. Failure to timely replace the tip pin can damage your chain, resulting
in an accident, personal injury or death.
5 - C H A I N I N S TA L L AT I O N
WARNING !
The 13s chain is not compatible with 12s and 11s drivetrains. Use the 13s chain
only and exclusively with components specifically designed by Campagnolo for the
Campagnolo 13s drivetrain; using other combinations could lead to accidents, physical
®
injury or death.
The use of components that do not belong to this drivetrain may significantly reduce
the overall performance of the drivetrain and it is therefore advisable not to use
components that do not belong to this drivetrain.
ENGLISH
29
C A M PA G N O L O . C O M