Before First Use; After Every Use; Cleaning Pump; Cleaning Hygienikit - Ameda Ultra Mode D'emploi

ALWAYS WASH HANDS WELL WITH SOAP AND WATER BEFORE PUMPING.

Before First Use

NOTE: Before using the HygieniKit system, check the parts for cracks,
chips, tears, color changes, or wear. They can affect the
function of the kit. If parts need replacing due to defects, please call:
In US: 1.866.99.AMEDA (26332)
In Canada: 1.800.604.6225
In other countries: Call your local distributor or the location where you
purchased your pump. For a listing of distributors in your country, please visit www.ameda.com.

After Every Use

Cleaning Pump

Wipe the Purely Yours Ultra Breast Pump with clean, damp cloth.

Cleaning HygieniKit

6
E N G L I S H
If your HygieniKit system is marked "STERILE," open and use.
If your HygieniKit system is NOT marked "STERILE," before first use:
• Boil all parts—except tubing, adapter cap,
and tubing adapter—for 20 minutes.
• Remove all parts from water right after boiling.
• Allow parts to air dry before assembly and use.
• Take apart HygieniKit system to clean.
• Rinse any milk residue from pump parts
with cool water.
• Wash gently by hand—except tubing,
adapter cap, and tubing adapter—
in warm, soapy water.
• Rinse well with warm, clean water.
Do not insert anything into white valve
while cleaning.
• Allow parts to air dry on clean surface.
Large plastic pieces (breast flanges and bottles) can be washed on the
upper rack of a standard household dishwasher.
Do not boil or wash
tubing, adapter cap,
and tubing adapter.
Do not boil or wash
tubing, adapter cap,
and tubing adapter.