Vortice AIRLINK 30 Livret D'instructions page 38

ENGLISH
DESCRIPTION OF THE UNIT COMMANDS
Warning (fig. 26A):
!
The control panel is accessible by inserting the hand in the space between the cover and the
front grille (1) or by lifting up the cover (2).
26A 26A
1
The device is controlled by means of on-board buttons (Fig. 26B).
26B 26B
A: SPEED KEY: 5 position selector (Night / Quiet / Performance / High performance / Boost).
LED 1- LED 5: speed / air flow from min to max. Press the button cyclically to select the desired value. The
white LEDs from 1 to 5 will light up to indicate the speed from 1 to 5.
B: MODE KEY: three position selector. Press repeatedly to cycle through the different modes: recovery, intake,
extraction, natural ventilation (intake and extraction LEDs switch on simultaneously).
The respective LEDs will light up steadily:
• RECOVERY heat recovery (the system works like an heat recovery unit, with cyclic inversion of the direction
of rotation).
• INTAKE the system operates as a fan, with room air intake.
• EXTRACTION the system works as a fan, with air extraction from the room.
• NATURAL VENTILATION If the device is connected to one or more units via a Wi-Fi network, the NATURAL
VENTILATION mode can be set: if set as an even unit the device will operate in extraction mode, if set as an
odd unit the device will operate in intake mode, creating an air current in the environment.
Note 1: In the HCS versions, natural ventilation can be selected automatically via the external IR remote
38
2
LED
ESTRAZIONE/AUTO COMFORT
LED
IMMISSIONE/AUTO HR%
LED
RECUPERO/AUTO NIGHT
C
PULSANTE PULSANTE
FUNZIONE MODALITÀ
LED 5
/ Boost
LED 4
/ High
Performance
LED 3
/ Performance
LED 2
/ Quiet
LED 1
/ Night
B
A
PULSANTE
VELOCITÀ
D
D