Vortice AIRLINK 30 Livret D'instructions page 31

ENGLISH
VORT MONO AIRLINK 30 installation VORT MONO AIRLINK 30 installation
Fig 1 ÷ 11 Fig 1 ÷ 11
NOTE: before proceeding with the installation, remove the internal protective packaging in the appliance. NOTE: before proceeding with the installation, remove the internal protective packaging in the appliance.
NOTE: before carrying out installation, remove the spacers inside the PVC installation pipe (provided as NOTE: before carrying out installation, remove the spacers inside the PVC installation pipe (provided as
accessory) and cut the pipe according to the wall thickness. accessory) and cut the pipe according to the wall thickness.
It is mandatory to install VORT MONO AIRLINK 30 within a perimeter wall with a thickness of at least 260 mm. It is mandatory to install VORT MONO AIRLINK 30 within a perimeter wall with a thickness of at least 260 mm.
1 1
≥260 mm
IN
2
2°÷3°
OUT
ø
mm 102
31