Setting Automatic Timer; Setting The Current Time - Chamberlain WPD60UP-05 Notice De Montage Et De Commande

Setting automatic timer/Current time
Note
To ensure that your roller shutter drive
can start operating, you need to make
some basic settings.
First, set the current time.
Slow forward/backward motion:
The time adjusts itself by one minute
forward or backward.
Fast forward/backward motion:
The digits start counting slowly
forward/backward, and the highest
adjustment speed is reached after
about 4 seconds.

Setting the current time

1. The digits of the clock
+ SET
move with increasing
speed.
2.
Release the buttons
SET
+
when the actual time is
achieved.
3.
Slow forward motion:
-
Fast forward motion:
-
- Slow backward motion:
Fast backward motion:
-
For initial commissioning
the display shows:
If necessary, correct the setting
with the slow forward/backward
motion
SET
Hold and
SET
Hold button and
SET
Hold button and
SET
Hold button
:
I 2 :0 0
AUTO
:
I 3:0 0
AUTO
press the button briefl y.
hold button
press the button briefl y.
and hold button.
19