Safety Instructions; Use Only Original Par Ts - Chamberlain WPD60UP-05 Notice De Montage Et De Commande

Important information for your safety
STOP

Safety instructions

Working on electrical systems
presents a risk of lethal electric
shock.
The following tasks must be performed
by a certifi ed electrician:
- Connecting a mains cable with plug.
- The installation of a socket or the fi xed
connection of the roller shutter drive
without plug, if necessary.
For this, pay attention to the guide-
lines of the VDE and the local
electricity provider
6
NOTE
Before installation, check whether the
roller shutter drive is intact.
The use of defective devices
can lead to bodily injury and
property damage (electric
shock, short circuit).
Therefore never use defective
or damaged devices.
In such a case please contact
our customer service.
Important
Perform all work, especially installation
and repair work, always with the power
off .

Use only original par ts

o f t h e m a n u f a c t u r e r
All repairs on the shutter drive
motor must only be performed
by the authorised service
department.
IMPORTANT
Use only original spare parts of the
manufacturer, whereby you will avoid
malfunctions or damage to the device.
THE MANUFACTURER DOES NOT WAR-
RANT THE USE OF NON-APPROVED
PARTS AND THE DAMAGES ARISING
THEREFROM.
NOTE
Undertake any necessary settings/repairs
to the roller shutter mechanism