i
Technische Daten
Type:
WPD60UP
Voltage:
230 V/50 Hz
Rated Power:
100 W
Standby:
2 W
Rated Torque:
10 Nm
Rated Speed:
30 r/min.
Kurzzeitbetrieb:
5 Minuten (*)
Short-time operation: < 0,4 r
Protection Class:
II
(
only for dry rooms)
Number of
switching times:
max. 2
Power reserve:
8 Stunden
Random generator:
(+) 0 - 30 Min.
Housing material:
Recyclable
plastic
Factory settings
Time
12:00 noon
Automatic timer
UP
07:00 am
DOWN
20:00 pm
NOTE
(*) You can operate the roller shutter drive for max.
5 minutes with max. load, then let the drive cool
down for about 30 minutes.
Data retention
With momentary power failure, the
user-programmed times and the actual
time are retained.
In this case, the display fl ashes and
slowly becomes darker after some time.
Power reserve
The roller shutter drive has a power reser-
ve of at least 8 hours.
In case of power failure for more than 8
hours, all data, including the set end
stops, are lost and must be re-entered.
In this case, a display like the one after a
software reset appears.
All settings must be repeated (see page
15).
27