Switching On/Off Automatic Operation - Chamberlain WPD45UP-05 Notice De Montage Et De Commande

Switching on/off automatic operation

To use the automatic mode, you must fi rst
set the opening and closing time.
If the automatic mode is enabled, you
can switch between the manual and
automatic operation. Each set opening
and closing time of the automatic timer
is maintained even after changing the
operating mode.
Status of LEDs
on = automatic mode ON
dark = Automatic mode OFF
Only manual operation
is possible.
fl ashes = after prior power failu-
re (see Page 19).
If at least one swit-
ching time has been
previously set.
Switch on automatic
1.
Press the CLOCK button for
approx 1 s.
The indicator light is on. If
the indicator light remains
dark, possibly no switching
time has been set.
Switch off automatic
2.
Press the CLOCK button for
approx 1 s.
The indicator light goes off .
17