Shutter Drive; Stop; Signs And Symbols; Proper Use - Chamberlain WPD60UP-05 Notice De Montage Et De Commande

Important information for your safety

STOP

Signs and symbols

Here it is about safety.
Please observe and follow all
instructions marked in this way.
Danger to life through electric
shock.
This symbol alerts you to ha-
zards when working on elec-
trical connections, components,
etc. It calls for safety measures to
protect the life and health of the
aff ected person.
NOTE/IMPORTANT
In this way we bring your attention to
other important contents for proper
operation.
Proper use of your
roller shutter drive
Use the roller shutter drive only for the
lifting and lowering of roller shutter with
webbing.
Conditions of use:
- Operate the roller shutter drive only in
dry rooms.
- A 230 V socket and a permanently in-
stalled connection cable with an
on-site release device (fuse) must be
available on the installation site.
- It should be possible to raise and
lower the roller shutter smoothly.
It must not jam.
- The contact surface for the roller
shutter drive must be level.
Permissible roller shutter belt widths
Type: WPD60UP
Standard webbing 23 mm
Belt thickness max. belt length
1,5 mm 5,2 m
1,3 mm 6,2 m
1,0 mm 7,6 m
IMPORTANT
Use only webbings in the permissible
lengths. Drawing in longer webbings
can cause damage to the drive.
5