Chamberlain WPD60UP-05 Notice De Montage Et De Commande page 49

Automatic timer/General closing time
The set closing time is valid for all seven
days of the week.
Example:
You want to close your shutter every
day of the week at 7:30 pm.
For this you must reset the factory set-
ting by 30 minutes.
Note
You can briefl y press the DOWN button
to check the set closing time.
This is then displayed.
Setting general closing
time
1. The digits of the clock
SET +
move with increasing
speed.
2.
Release the buttons
SET +
when the desired clo-
sing time is reached.
You can potentially cor-
rect the slow forward/
backward motion.
3.
- Slow forward motion:
Fast forward motion:
-
Slow backward motion:
-
- Fast backward motion:
The factory default setting
appears in the display
The following settings are always
only valid for the shown travel
direction of the shutter.
SET
Hold and
SET
Hold button and
SET
Hold button and
SET
Hold button
:
2 0 :0 0
AUTO
:
I 9:3 0
AUTO
press the button briefl y.
hold button
press the button briefl y.
and hold button.
21