Chamberlain WPD60UP-05 Notice De Montage Et De Commande page 38

Installing the roller shutter drive/Drawing in and securing the webbing
1.
Check the position of the fastening
hook, it should be easily accessible.
Note
If the mounting hook is not seen in
the mounting hole, insert the power
plug into a socket and press and
release the UP button until the hook
is in the correct position.
Risk of injury through
the winding wheel, if
you reach into the
mounting hole with the
motor running.
Pull out the power plug before you
reach into the mounting hole.
2.
Insert the webbing into the front
of the roller shutter drive and attach
it to the hook.
3.
Insert the power plug back into the
socket.
10
Briefl y press the CLOCK button and
4.
then the UP button until the webbing
is wound once around the winding
wheel.
IMPORTANT
Place the web-
bing always from
the top over the
Mounting hook for belt.
5.
Put the webbing cover on the
mounting hole.
Important
Pull the webbing tight
when winding so that
the pulley rotates.