Titan MAXI II Notice D'instructions page 31

8. Maintenance
8.1. Cleaning and maintenance of the unit
Insertion slot.
Hollow spaces of the sealing pincers.
Transport wheel.
Guide screw
Then oil it with a commercial spray oil.
Maintenance unit!
daily check of the compressed air
daily check of the oil level
draining the water separator
cleaning the filter according to instructions
Tool inspection!
Perform a daily visual inspection of the outside of the unit. The early detection
of damaged parts extends the life o the unit. Replace all damaged parts with
new parts.
MAXI II
Dirt and abrasion impair the function of the unit. Therefore clean
the following areas every week. If possible, perform air-cleaning
(wear protective glasses).
Do not use any solvent containing cleaning agents for
H 263 EU 49/07
reasons of health.
31 / 55