Titan MAXI II Notice D'instructions page 29

Tensioning
Press the right switch-on key with the
thumb of your right hand. The key is
caught, until the tensioning is finished.
The staff can interrupt the tensioning by
shortly pressing the left locking key.
Sealing
Use the thumb of your right hand to press
the left switch on key until the sleeve is
closed and the band is cut.
The unit then releases the seal. Hold the
end of band cut with your left hand and
press the lifting lever and the compressed
air motor.
To be sure that the unit formed a clean seal,
check the strapping thoroughly.
The following picture shows a correctly carved seal.
Check the seals regular:
for crackings on the sleeve
and
for neat cutting edges.
MAXI II
H 263 EU 22/08
29 / 55