Titan MAXI II Notice D'instructions page 20

2.1. Intended use
This tool is made for strapping of heavy packages such as sectional steel,
tubes, coils, etc. the tool is designed and manufactured for safe handling
during the strapping operation. This tool is intended for strapping with steel
strap material.
The strapping tool complies with the German and European safety standards
and is in accordance with
EU Guidelines:
Guidelines on Machinery 2006/42/EG (Page: 32)
Standards applied and technical specifications:
see declaration of conformity (Page: 32)
2.2. Environmental Protection Notice
MAXI II
No hazardous physical or chemical substances are
used in the manufacture of the devices.
Comply with the applicable regulations for disposal.
H263 EU 22/06
20 / 55