Functional Description - Abicor Binzel ABIDRIVE V2 Mode D'emploi

TIG cold-wire feeder
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of transport
damage.
Goods inspection
In case of complaints
Packaging for returns
Tab. 8 Transport
NOTICE
• The TIG cold-wire feeder must be transported and operated in an upright position only.
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-5

5 Functional description

1
1 ABIDRIVE V2 – front
2 TIG welding torch with wire feed
Fig. 3 System overview
The TIG cold-wire feeder is part of a welding system. The wire required for TIG welding is delivered through the cable
assembly and to the manual welding torch (2).
The wire is fed constantly to the TIG arc via a four-roll drive. The TIG arc is produced by an ABITIG manual welding torch (2)
and a power source (3).
The components needed for welding, such as welding current, shielding gas and coolant, are connected to the TIG cold-
wire feeder (1) as required. The required welding wire depends on the material to be welded and is taken from the
integrated wire spool.
BAL.0415.0 • 2018-10-22
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier
immediately. Retain the packaging for potential inspection by the carrier.
Where possible, use the original packaging and the original packaging material. If you
have any questions concerning the packaging and/or how to secure an item during
shipment, please consult your supplier.
3
2 4
10 8
9
3 Power source 6 Wire spool seat
4 Gas connection 7 Intermediate cable assembly
5 ABIDRIVE V2 – back 8 Potential equalisation cable
5 Functional description
5 6
7
9 Coolant return (red)
10 Cooling unit
11 Coolant supply (blue)
EN - 7