Publicité
Les langues disponibles
Les langues disponibles
Operation
Attach the device to the carrier/hoist with the suspension
eye
Set the grab range and height-adjustable support
according to the material to be lifted (concrete pipe)
1. Position and lower the unit over the material to
be gripped until the height-adjustable support
rests on it
Slowly lower the grabbed material at the destination
4. As soon as the material to be lifted is on the
ground, move the lifting eye to position B
"Release
5. Pull the suspension eye upwards until the
changeover is perceptible by an audible CLICK
sound.
6. Lower the unit and move the suspension eye
downwards to the stop. The grab remains open
due to the changeover.
54500008
2. Move the suspension eye in the baffle to
position A "Grip
3. Carefully lift the gripping material and transport
it to its destination. Device is securely locked - in
case of "slack rope formation" no loosening of
the material to be gripped.
7. Device can be lifted and is ready for the next
gripping operation.
18 / 24
GB
Publicité
