Publicité
Les langues disponibles
Les langues disponibles
1.
or any other heater components. Extra care should be taken when closing junction box cover to ensure wires are not being pushed
out of position.
Some prefer or are required to make a weather-proof connection. If so, you may use Liquid tight conduit for the wire exposed
2.
wire to connect to heater
sensor location:
1" down from ceiling
3" to front or side of
heater; not in corner..
Figure 11: Attaching the brackets to the heater
the heater and screw bracket to heater one at
a time.
Note: If all the screws on
the back are unscrewed simultaneously, the
back plate may come loose.
6
4
2
3
8
1
9
5
11
10
3
Sensor Location:
3" from heater.
1" down from ceiling
** Pure Control distance to heater is max 300 feet
Figure 3: Position the sensor according the picture.
back of
Main Power Switch: On/Off Knob
comes packed inside rock tray.
Field install. Turn knob to turn on
heater.
1.
2.
3.
Sensor
4.
7
5.
6.
7.
8.
9.
10.
11.
12
12.
Figure 9: Resetting the temperature cut-out
1
1. Temperature cut-out sauna heater
Publicité
