Pip Mode - BRAND Transferpette electronic Mode D'emploi

PIP Mode

The standard program – a previously set volume is aspirated and then discharged.
Volume and speed adjustments are described on pages 38 and 39.
What to do
1.
Bring up the menu
2.
Select PIP mode
3.
Confirm PIP mode
4.
Prepare for
pipetting
5.
Aspirate liquid
42
How to do it
Press the MENU key three
times to bring up the mode
selection menu. 'Mode'
blinks.
Use one of the arrow
keys to scroll through
the modes until 'PIP'
appears.
'Mode' continues to
blink.
Press the ENTER key.
The display now shows
'blo' for blow-out.
Press the pipetting key
once to move the piston
into the start position.
The arrow in the display
points upwards (aspira-
tion).
Press the pipetting key
once to aspirate the
liquid.
The Programs · Settings and Use
Keys to press Display readout
3x
1x
1x
1x