Publicité
Les langues disponibles
Les langues disponibles
Inspect all the seat belts before every operation:
•
Insert latch plate into the buckle and verify there is click
sound� The latch plate should move smoothly and the click
sound means it is safety locked.
•
Press the red button on the buckle to make sure the belt could
be released smoothly.
•
Pull out all the safety belt and inspect for any damage,
including cuts, wear or stiffness. If any damage is found or the
belt cannot be used, please contact an authorized CFMOTO
dealer for service or replacement.
•
Clean the belt with soft soapy water. Do not use bleach, dyes
or harsh household detergents. Flush the whole belt, buckle
and retractor cover
Maintenance
with clean water and allow to air dry�
2
1
200
1
2
Publicité
