Publicité
Les langues disponibles
Les langues disponibles
Safe Operation - Driving Safely
Riding on Gravel, Loose Stones, or Other Slippery Surfaces
Riding on gravel or loose stones is very similar to riding on ice. They affect the steering of vehicle, possibly
causing it to slide and tip over especially at high speeds. In addition, braking distance may be affected.
Remember that "gunning" the throttle or sliding may cause loose stones to be ejected rearwards which could
hit other people�
Crossing Obstacles
Obstacles on the trail should be traversed with caution. This includes rocks, fallen trees, and depressions.
You should avoid them whenever possible. Remember that some obstacles are too large or dangerous to
cross and should be avoided. As a guideline, never attempt to cross an obstacle higher than the ground
clearance of the vehicle. Small rocks or small fallen trees may be safely crossed. Approach obstacles at
low speed and to as much a right angle as possible. Adjust speed without losing momentum and do not
accelerate abruptly. The passenger must grasp handhold firmly and brace feet on the floor.
Hill Driving Conditions
When driving on hills or slopes, two things are highly important: be prepared for slippery surfaces or terrain
variations, obstacles, and brace yourself properly inside vehicle. If you climb or descend a hill that is too
slippery or has too loose a surface, you can lose control. If you go over the top of a hill at high speed, you
may not have time to prepare and react to conditions on the other side�
Avoid parking on a steep slope or incline� Placing the transmission in Park on a steep slope or incline places
pressure on the parking gear, making it difficult to shift out of Park into another gear. If you must park on a
steep slope or incline, block the wheels on the downhill side using rocks or other suitable material.
127
Publicité
