•
B. Pull out the winch cable that is wrapped unevenly onto the drum.
•
C� Re-engage the winch drum�
•
D. Have an assistant pull the winch cable hook strap tightly to apply about 100 lbs. (45 kg) of tension.
•
E. Slowly winch the cable in while the assistant moves the end of the cable back and forth horizontally
to evenly distribute it onto the drum.
Winch 'Shock Loading'
Your winch (if equipped) is designed and tested to withstand the loads produced when operated from a
stationary vehicle. Always remember that the winch, cable and components are NOT designed for shock
loading. Follow these guidelines:
•
Never attempt to "jerk" a load with the winch. For example, never take up cable slack by moving the
winching vehicle in an attempt to move an object. This is a dangerous practice that generates high loads
which may exceed the strength of the components. Even a slow moving vehicle can create a large
shock load which can cause damage�
•
Never quickly turn the winch ON and OFF repeatedly (''jogging"). This is a form of shock loading. This
puts extra load on the winch components, the cable, and generates excessive heat in the motor and
relay assembly.
•
Never tow a vehicle or other object with your winch. Towing with a winch produces shock loading even
when towing at slow speeds. Towing from the winch also positions the towing force high on the vehicle,
which can cause vehicle instability and the possibility of an accident.
Safe Operation - Driving Safely
143