Publicité
Les langues disponibles
Les langues disponibles
Spark Plug Removal to Expel Water from the Engine
If water has been ingested into the engine, it is important to remove the water as soon as possible by
removing the spark plug( s ) and using the starter system to rotate the engine for a short period to expel water
out of the cylinder( s ) . Verify that the air box has been drained of water before attempting to expel water.
Have a dealer service the engine immediately�
Major engine damage can result in the vehicle if water is ingested into the engine� Have the vehicle
serviced by your dealer promptly if your vehicle becomes immersed or stalls in water that exceeds
the footrest level� It is important to contact your dealer for service before starting the engine if water
has been ingested� Water inside the engine can cause a 'hydraulic lock' effect that can damage the
starter and engine components� The engine oil should be checked for water contamination� Drain
and refill with new engine oil if water is found in the crankcase.
Maintenance
CAUTION
180
Publicité
