Publicité
Les langues disponibles
Les langues disponibles
KEY POINTS OF LUBRICATION SCHEDULE:
Check all components at the intervals outlined in the Periodic Maintenance Schedule� Items not listed in the
schedule should be lubricated at the general lubrication interval.
•
Change lubricants more often under severe use, such as wet or dusty conditions.
•
Use All Season Grease on pivot points�
•
Lubricate every 500 miles ( 8 00 km ) , before long periods of storage, after pressure washing, or after
submerging drive system.
Item
Engine oil
Transmission oil
(1000 Engine)
Brake fluid
Front gear case oil
Rear gear case oil
Suspension pivots and
drive train
Maintenance
Lubricant
SAE 10W-40 / SAE 5W-40 / SAE 15W-40
( S ee page 111 for oil viscosity chart )
SAE 75W-90 GL-5
DOT4
SAE 80W-90 GL-5
SAE 80W-90 GL-5
All Season Grease
Screw off, clean, insert and pull out
Screw off, clean, insert and pull out
Oil capacity: 8.5 oz. ( 2 50mL )
Oil capacity: 13.5 oz. ( 4 00mL )
Grease gun-Pump grease until it begins
to flow from the pivot point
146
Method
dipstick to check oil level
dipstick to check oil level
Keep level between
upper and lower lines
Publicité
