Change Transmission Oil
1� Park the vehicle on the level ground�
2� Start the engine and warm for ( 2 ~3 ) minutes, then stop the
engine�
3� Place a pan under the transmission drain hole ( 1 ) to store the
oil�
4� Remove the dipstick and wipe it clean�
5� Remove the transmission magnetic drain bolt ( 2 ) and washer
( 3 ) to drain out the oil.
6� Wait until the transmission is drained completely�
7� Clean any debris or contaminants from the magnetic drain bolt
( 2 ) . Replace the washer ( 3 ) with new one if damaged.
8� Install the magnetic drain bolt ( 2 ) and washer ( 3 ) .
Drain Bolt Torque: 14�7 ft-lb� (20 N·m)
9� Use a dry and clean cloth to wipe the area around magnetic
drain bolt.
Add the recommended type of oil ( SAE 75W-90 GL-5 ) into oil
dipstick hole using the funnel, funnel extension tube and tube
adapter supplied with the vehicle. Keep oil level in the specified
range�
Maintenance
167
1
3
2