16
Instructions for Use
Installation
Normal exposure to the environment cannot damage the TV 801 Navigator.
NOTE
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
Installation
Do not remove the adhesive and protective cap before connecting the
CAUTION!
turbopump to the system.
Figure 2
Install this device only in indoor ambient and in any case don't use in
an environment exposed to atmospheric agents (rain, snow, ice),
dust, aggressive gases, or in explosive environments or those with a
high fire risk.
During operation, the following environmental conditions must be
respected:
200/252
maximum pressure: 2 bar above atmospheric pressure
temperature: from +10 °C to +45 °C
relative humidity: 0 – 90 % (non-condensing)
TV 801 Navigator User Manual / 87-900-953-01
(G)