Transport; Serial Numbers - Peg-Perego VIAGGIO 2-3 SHUTTLE Notice D'emploi

ensuring that the seat does not move
during this operation.
11• Secure your child with the vehicle
seat belt as shown in the figure.
12• Fasten the seat belt, ensuring that it
clicks into place. Position the two parts
of the seat belt as shown in figure; both
the waist and shoulder straps must pass
under the armrest.
13• To complete the installation process
into the car, the adjustable shoulder
loop can be used. To remove the loop
from its location under the fabric of the
seat, follow the instructions below.
14• Remove the strap from the loop
under the car seat.
15• Extend the strap for the shoulder loop
by pressing the button located behind
the car seat (1) and pulling it upwards (2).
16• Insert the seat belt into the shoulder
loop (as in the box), then lower the
shoulder loop (1) by pulling the belt (2).
17• The correct height of the shoulder
loop is just above the shoulder level.
How to remove the fabric
lining
The fabric seat of the Viaggio 2-3
Shuttle can be removed for cleaning.
The armrests are not removable.
18• Follow the washing instructions
on the packaging label (shown in the
figure).
19• Unhook the two eyelets from the
buttons on the sides of the car seat
base.
20• Release the two hooks from the
seat base.
Maintenance and cleaning
of the fabric lining
Brush the fabric parts to remove dust.
• Follow the washing instructions on
the label sewn onto the seat's lining
(fig. 18).
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Repositioning the car
seat cover:
21• Fit the cover from the front of the car seat
by inserting it into its housing (fig_a); insert
the two hooks of the seat in the appropriate
holes near the rear of the car seat (fig_b).
22• Hook the two side slots to the
buttons on the sides.

Transport

23• Viaggio 2-3 Shuttle is easily carried
using a handy transport handle.

Serial numbers

24• On its underside, Viaggio 2-3
Shuttle contains information about its
product name, production date and
serial number, along with its orange
certification label.
Cup holders
25•
The car seat comes with a cup
holder. Place the cup holder on the
mushroom button, present on either
side of the seat (fig_a), and secure it in
place (fig_b).
24