Transport - Peg-Perego VIAGGIO 2-3 FLEX Notice D'emploi

REMOVING THE LINING FROM THE
HEADREST:
28• To remove the plastic cover on the
back of the headrest, unfasten the two
side hooks.
29• Release the bottom (1) and top (2)
as shown.
30• To remove the headrest lining,
slightly raise the headrest and release
the two elastics on one side (fig_a)
and then on the other (fig_b). Remove
the lining.
Maintenance and cleaning
of the fabric lining
Brush the fabric parts to remove dust.
• Follow the washing instructions on the
label sewn onto the seat's lining. (fig. 21)
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Repositioning the car seat
cover:
RELINING THE SEAT:
31• Insert the plastic panel in the pocket
of the seat lining.
32• Slip the seat lining on from the
front (fig_a), inserting the profile in the
appropriate slot (fig_b).
33• Insert the two hooks on the base
of the seat near the bottom of the
backrest.
34• Finally, attach the two side eyelets
to the buttons on the sides of the seat.
RELINING THE BACKREST:
35• Slightly widen the side wings of the
car seat and insert the plastic flaps into
their slots in the backrest, ensuring they
come out below as shown in figure.
36• Slip on the side lining and fasten the
two upper elastic bands; repeat for the
lower elastic bands.
37• Fasten the four side eyelets to the
appropriate buttons.
RELINING THE HEADREST:
38• Slightly raise the headrest and put
the lining back in place, fastening the
two elastics as shown, first on one side
(fig_a) and then on the other (fig_b),
and paying attention to the white
polystyrene.
39• Fasten the back cover along
the three central points above the
adjustment handle, following the
sequence shown in the figure.
40• Finally, fasten the two sides to the
headrest.
How to fold the car seat
41• Lower the headrest (1), tighten
the side restraining wings (2) and, if
necessary, push in the cup holders (3).
42• Pull the ribbon upwards (1) to
release the backrest and at the same
time push the backrest down (2); this
will fold down onto the car seat.
43• Attach the ring that fastens the
backrest to the seat when the product
is closed.

Transport

44• Viaggio 2-3 Flex is easily carried
using a handy transport handle
20