Step 4:
Inserting o the tab holder (39)
1. Press the "PUSH" button on the tab holder (39) and insert the
tab holder (39) into the tab holder bracket (38).
Step 5:
Checks and How to start
1. Check the correct installation and unction o all screwed and
plug connections.
2. When everything is in order, connect the power supply cable
(81) with wall power (220-240V~50-60Hz) and switch on the
main switch (98) below the ront rame.
3. Put the saety key (43) onto the computer (3) and the computer
will show normal manual mode. Put the saety clip(43)at your
exercising cloth and stand on the side rails (22). Press Start-
Button and ater a Count Down the treadmill start moving.
Start walking onto the walk surace (45) when speed is slowly
and ollow the speed. Familiarize yoursel with the machine at
a low speed settings.
4. Run in the middle o the running surace (45) and hold yoursel
tight at handgrips (4) i you eel insecure and don't step on the
side oot rails (22). Only run with look at the Computer on the
treadmill during the running. In emergency case, step o the
treadmill lateral and hold onto the handgrips (4).
5. I you like to use an external MP3 player or example, connect
with cable (100) and computer (3).
Note:
Please keep the tool set and the instructions in a sae place as
these may be required or repairs or spare parts orders becoming
necessary later.
16