Champion Global Power Equipment 73001I-DF Manuel Du Propriétaire page 8

ASSEMBLy
Your generator requires some assembly. This unit ships
from our factory without oil. It must be properly serviced
with fuel and oil before operation.
Remove the Generator from the Shipping Carton
1. Set the shipping carton on a solid, flat surface.
2. Remove everything from the carton except the
generator.
3. Using the carrying handles of the unit, carefully
remove the generator from the box. (two people lifting
is recommended)
Connecting the Battery (Electric Start Models)
1. Using a screwdriver, remove the two (2)
maintenance cover screws from the battery
maintenance cover. (A)
2. Once the screws have been removed, the rubber
pull-tab on the cover can be pulled out to help
loosen and dislodge the maintenance cover. (A)
3. Remove the battery maintenance cover. (A)
4. Cut zip tie that is binding the battery cables
together.
5. Using a screwdriver, unscrew the battery bolt in the
red, positive (+) battery terminal.
6. Connect the red, positive (+) wire lead to the
positive (+) terminal on the battery using the bolt.
7. Pull rubber sheath over battery cable connection
and battery terminal.
8. Repeat steps 5-7 for the black, negative (-) battery
wire lead and black, negative (-) battery terminal.
8
Connecting the Battery Cont'd.
NOTE
If the battery cables are not visible once the battery
maintenance cover has been removed, please note
that cables may be tucked up above the battery,
not in plain view.
A