Champion Global Power Equipment 73001I-DF Manuel Du Propriétaire page 153

Test Verification of Conformity
Verification Number:
On the basis of the referenced test report(s), sample(s) tested of the below product have been found to comply
with the standards harmonized with the directives listed on this verification at the time the tests were carried out.
Other standards and Directives may be relevant to the product. This verification is part of the full test report(s) and
should be read in conjunction with it. This verification replaces previous verification 190800418HZH-V1 dated on
2019-09-05.
Once compliance with all product relevant
assessment and production control, the manufacturer may indicate compliance by signing a Declaration of
Conformity themselves and applying the mark to products identical to the tested sample(s).
Applicant Name & Address:
Product Description:
Ratings & Principle
Characteristics:
Models/Type References:
Brand Name:
Relevant Standards/Directives:
Verification Issuing Office
Name & Address:
Date of Tests:
Test Report Number(s):
Signature
Name: Jun Wu
Position: Manager
Date: 07 Nov.2022
This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This
Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification
Intertek
220500634HZH-V1
mark directives are verified, including any relevant e.g. risk
CHAMPION POWER EQUIPMENT, INC.
12039 SMITH AVENUE, SANTA FE SPRINGS, CA 90670, USA
Low power generating sets
50Hz, CosΦ=1,0, DC 12V, 8A, others see next page
See next page
CHAMPION, CHAMPION POWER EQUIPMENT, CHAMPION GLOBAL POWER
EQUIPMENT
EN ISO 8528-13:2016
The Machinery Directive 2006/42/EC
Intertek Testing Services Zhejiang Ltd., Hangzhou Branch
4th Floor, Building 4#, No. 22, 22nd Street, Qiantang District Hangzhou, China 310018
2022-11-03
180600467HZH-001+A2
Page 1 of 2
program.
GFT-OP-11b (02-April-2020)
EN
153