Télécharger Imprimer la page

Kenmore ELITE SENSOR SMART Mode D'emploi page 46

Publicité

Les langues disponibles

Les langues disponibles

Problem
Possible Cause
Solution
Load is
Not removing load promptly.
Unload the washer as soon as it stops.
Wrinkled
Wrong cycle for fabrics
Use cold rinses and cycles with slow
being washed,
spin speeds to reduce wdnkling.
Overloading.
Loads should move freely during
wash. Wash smaller loads.
Wash water not warm enough
UseAutomatic Temperature Control
to relax wrinkles. Using warm
(ATC). If safe for fabric, use warm or
dnses,
hot wash water. Use cold dnse water.
Hoses reversed.
Reverse hoses (see "Installation
Instructions," Sections D & E).
Load is
Overloading.
Loads should move freely during
Tangled/Twisted
wash. Wash smaller loads or increase
water level.
Clothes wrapped around
Do net wrap items around agitator when
agitator,
loading washer.
Clogged
Use of color-safe bleach in
Do net put powdered (color safe) bleach
Bleach
chlorine bleach dispenser,
in the chlorine bleach dispenser, Use
Leaking/
the detergent dispenser to add pow-
Bleach on
dered bleach.
Wrong Loads
Improper use of chlorine bleach.
Always measure bleach before adding
to the dispenser. Carefully pour into
the dispenser. Wipe up bleach spills.
46

Publicité

loading