REVIEW INSTALLATION
Take a few minutes to complete this
checklist. It will help assure you that
you have a proper installation and
increase your satisfaction with your
Kenmore ELITE
TM
washer,
Check electrical requirements,
Be sure you have correct electrical
supply and recommended grounding
method.
I
Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
cotter pins.
• Installed all parts listed on
pages 7-9.
[
Check that:
• The washer is level.
• The nuts on the front legs are tight.
[
Check that the water faucets are
turned on.
FINAL STEPS
I
Plug power supply cord into
grounded outlet.
[
Remove the blue protective film on the
console and any tape remaining on
washer.
[
Take a few minutes and read the
"OPERATING YOUR WASHER"
section to fully understand your new
washer. Then, start the washer and
allow it to complete the HEAVY DUTY
Cycle.
20