Kenmore ELITE SENSOR SMART Mode D'emploi page 25

CHANGING CYCLES/OPTIONS/
MODIFIERS
The Cycles, Options and Modifiers
selected may be changed any time
before START is pressed, A single short
tone will sound when a selection is
made. If an unavailable combination is
selected, two short tones will sound and
the last selection will not be accepted.
To change Options/Modifiers:
The Options and Modifiers can be
adjusted prior to the event occurring,
STEP 1. Press STOP/CANCEL once,
This will stop the washer.
STEP 2. Select desired Options and/or
Modifiers.
STEP 3. Press START to restart the
washer.
@
To change cycles:
STEP 1. Press STOP/CANCEL twice.
STEP 2, Select desired wash cycle.
STEP 3. Press START to restart the
washer at the beginning of the new
cycle. If you do not press START within
5 minutes of pausing, the washer will
automatically shut off.
25