Kenmore ELITE SENSOR SMART Mode D'emploi page 26

For ease of use, there are preset
cycle settings that will provide the
recommended fabric care settings
for each cycle,
PRESET CYCLE SETTINGS
To use the Preset Cycle Settings:
STEP 1. Select the cycle you want by
pressing one of the pads under SELECT
CYCLE, The preset cycle settings
(as listed in the chart below) will be
displayed.
STEP 2. Press START. The wash cycle
will begin.
PRESET CYCLE SETTINGS
Wash/Rinse
Cycle Agitation Time Water Level Temperature
HEAVY DUTY 12 minutes Large Warm/Cold
REGULAR 10 minutes Large Warm/Cold
PERMANENT PRESS 8 minutes Large Warm/Cold
HANDWASH CASUAL 6 minutes Medium Warm/Cold
ULTRA HANDWASH 4 minutes Small Cold/Cold
(agitation and soaking)
EXPRESS WASH 4 minutes Small Warm/Warm
WHITEST WHITES 12 minutes Large Hot/Cold
SOAK 10 minutes Large Warm/Cold
RINSE/SPIN 4 minutes* Large Warm/Cold
(stow speed agitation)
DRAIN/SPIN 6 minutes* N/A N/A
(fast speed spin)
* The totat cycle time will appear in the display time, including an estimate for drain times.
26