Kenmore ELITE SENSOR SMART Mode D'emploi page 45

Problem Possible Cause Solution
Lint on Load Improper sorting. Sort lint givers from lint takers
and by color.
Overloading. Lint can be trapped in load if
overloaded. Wash smaller loads.
Paper or tissue in pockets. Clean out pockets before washing.
Not enough detergent. Use enough detergent to
hold lint in water.
Detergent not dissolving. Use Automatic Temperature Control
Water temperatures lower (ATC), ATC ensures wash water
than 70°F (21°C). temperature will be warmer than 70°F
(21°C).
Tearing Overloading. Improper Loads should move freely during wash.
use of washer. Wash smaller loads or increase water
level.
Improper use of chlorine Do not pour chlorine bleach directly
bleach. Undiluted bleach on load, Wipe up bleach spills.
will damage fabrics.
Sharp items not removed Clean out pockets before washing.
from pockets; fasteners Zip zippers before washing.
not fastened.
Items damaged before Mend rips and broken threads in
washing, seams before washing.
Stains on Improper use of fabric Dilute fabric softener and add to
Load softener in washer or dryer, deep rinse only.
Iron in water (rust). Install an iron filter.
Under use of detergent causing Use enough detergent to remove
soil to be redeposited, soil and hold it in suspension.
Dye transfer due to not Sort dark clothing from whites
sorting loads properly, and lights.
Dye transfer due to not Unload the washer as soon as
unloading washer promptly, it stops.
45