Publicité
Les langues disponibles
Les langues disponibles
CHOOSING
CYCLES
(Continued)
EXPRESS WASH
Fast cleaning starts with a continous
spray of water and detergent mixture as
the load is spun at low speed. Choose 4
to 10 minutes of wash time for small,
lightly soiled loads that are needed in a
hurry. For the fastest cycle, select small
water level and warm wash. The preset
wash time for this cycle is 4 minutes.
WHITEST WHITES
Irlu- wJll=- "-,_1 ! 1[_ iql,
Detergent and bleach are dispensed at
the proper time for the best possible
performance.
Use this cycle to get the best cleaning
results for your heavily soiled white
fabrics. For maximum soil and stain
removal, liquid chlorine bleach must be
used. The preset wash time for this cycle
is 12 minutes.
CUSTOM SET
This cycle allows you to store a
customized wash cycle.
To Custom
Set a wash cycle:
STEP 1. Select cycle.
STEP 2. Select the desired Options.
STEP 3. Select the desired Modifiers.
STEP 4. Press and hold CUSTOM SET
until a beep sounds (approximately
3
seconds).
STEP 5. Press START.
The Custom Set cycle is now stored for
future use. To reuse, select CUSTOM SET
and press START.
CHOOSING
OPTIONS
Use this control to select
the desired options for
your wash cycle.
OPTIONS
CATALYST
TM
TM
CATALYST
allows soap to soak and
penetrate the entire load providing
improved
stain and soil removal.
28
CATALYST
TM
usesyour
detergent in a
unique way. Water flushes through the
dispenser to dissolve the detergent. Then
the detergent mixture is sprayed onto the
load while the washer spins at low speed.
This cleaning action will last 1 to 5 mira
utes depending on the cycle selected. The
washer then stops spinning and fills to the
selected water level and continues wash-
ing with the selected cycle.
NOTES:
• CATALYST
TM
cleaning action is auto-
matically preset as an option in the
Heavy Duty and Whitest Whites cycles.
The indicator light illuminates. This
option may be de-selected before press-
ing START. It is an automatic portion of
the Express Wash and Ultra Handwash
cycles. The indicator light will not illumi-
nate. If the CATALYST
TM
option is
selected in one of these cycles, the spin
and spray wil simply be longer.
• For best results with CATALYST
TM
, the
load should be dry at the start of the
cycle.
• The CATALYST
TM
process reduces the
need for pre*treatments. Stubborn and
setqn stains may require additional
treatment.
SOAK
Use SOAK for set-in stains and soil that
need extra time for removal. The SOAK
option can be used in two different ways:
• Choosing SOAK with a cycle gives a brief
period of soak added to the wash time.
• Choosing SOAK Only gives up to 60
minutes of soak time. SOAK Only should
be followed by a wash cycle with
additional detergent added.
SOAK with a cycle:
STEP 1. Place a load of sorted clothes in
the washer. Add measured detergent to
the detergent dispenser.
STEP 2. Select the desired cycle.
STEP 3. Select SOAK from the
Options pads.
STEP 4. Select the desired WATER
LEVEL, WASHIRINSE TEMP and
AGITATION TIME from the
Modifiers pads.
STEP 5. Press START. The washer agi-
tates briefly, then soaks up to 12 minutes,
depending on the cycle. After soaking, the
washer completes the selected cycle.
SOAK Only:
STEP 1. Place a load of sorted clothes
in the washer. Add measured detergent to
the detergent dispenser.
STEP 2. Select SOAK from the
Options pads.
Publicité
