Publicité
Les langues disponibles
Les langues disponibles
5.7 - ALARM SETTINGS
Allows you to select your preferred
alarm mode.
1
2
Sound alarm
Sound alarm
and vibration
Vibration only (the alarm will
not sound on Parent Unit but
it will on Nursery Unit).
IMPORTANT
When in MENU or SUB-MENU mode NO sound, alarm or vibration will be emitted
from either the Parent Unit or the Nursery Unit even if they were activated before
pressing the MENU or SUB-MENU mode.
5.8 - HOLD
Allows you to put your Angelcare monitor on HOLD.
1
2
IMPORTANT
When your monitor is on HOLD, the movement-detection feature and movement alarm
are disabled.
IMPORTANT
When your monitor is in HOLD mode, the movement alarm will not go off and the sound
will not be transmitted. When your monitor is in Sound only mode, the HOLD function
cannot be activated.
All manuals and user guides at all-guides.com
1) Press MENU button 4 times.
2) Using the arrows, select
IMPORTANT
Vibration option will work when the
following alarm functions are activated:
• Out-of-range
• Temperature alert
• No movement detection
1) Press and hold the Down Volume
2) To deactivate this function, press
The Nursery Unit
Indicator blinks.
the desired alarm mode.
NOTE:
Vibration mode not available in some countries.
Sound alarm will replace vibration
mode when the Parent Unit
is charging.
for 20 seconds.
arrow for 2 seconds.
The Hold Icon will appear on the screen.
The Parent Unit will emit a double beep
every minute to remind you that your
monitor is on HOLD.
and hold the Down Volume arrow
for 2 seconds.
E
N
111
Publicité
